1
Faculty of Chemical, Petroleum and Gas Engineering ,Semnan University, Semnan, Iran
2
Professor Of Department of Chemical Engineering, Faculty of Chemical, Petroleum and Gas Engineering, Semnan University, Semnan, Iran
Abstract
Heat transfer has a crucial importance in the engineering applications; therefore, various methods for enhancing the heat transfer have been proposed by the researchers and new methods have been developed in recent years. One of these methods is using nanofluids. Nanofluids have enhanced thermal properties in compare with the base fluid. In this paper, the latest studies on the use of nanofluids in the double tube heat exchangers and shell and tube heat exchangers with description of the test system has been evaluated and the results have been summarized. In the end, the results of using shell and tube heat exchangers as a bed for exothermic reactions in the process of Fischer-Tropsch synthesis using nanofluids is provided. In all of the work done by increasing the nanoparticles volume fraction and the Reynolds number, the heat transfer coefficient and process efficiency have increased.
Khedkar, Rohit S., Shriram S. Sonawane, “Heat transfer study on concentric tube heat exchanger using TiO2–water based nanofluid”, International Communications in Heat and Mass Transfer 57, 2014, pp. 163–169.
Xuan, Y., W. Roetzel, “Conceptions for heat transfer correlations of nanofluids”, Int. J. Heat Mass Transfer 43, 2000, pp. 3701–3707.
Xuan, Y. and Q. Li, “Investigation on convective Heat transfer and flow features an nanofluids”, J. Heat transfer 125, 2003, pp. 151.
Bell, K. J., “Final report of the cooperative research program on shell-and-tube heat exchangers”, Eng. Expt. Sta, BullUniversityof Delaware, 1963.
Maxwell, J. C., A Treatise on Electricity and Magnetism, second ed. Clarendon Press, Oxford University, UK, 1881.
Darzi, A. A., M. Farhadi, K. Sedighi, “International Communications in Heat and Mass Transfer”, International Communications in Heat and Mass Transfer 47, 2013, pp. 105–112.
Albadr, J., S. Tayal, M. Alasadi, “Heat transfer through heat exchanger using Al2O3 nanofluid at different concentrations”, Case Studies in Thermal Engineering 1, 2013, pp. 38–44.
Farajollahi, B., S. Gh. Etemad, M. Hojjat, “Heat transfer of nanofluids in a shell and tube heat exchanger”, International Journal of Heat and Mass Transfer 53, 2010, pp. 12–17.
Jayhooni, S. M. H., A. Mirvakili, M. R. Rahimpour, “Nanofluid concept for enhancement of hydrogen utilization and gasoline production in fixed bed reactor Fischer-Tropsch synthesis of GTL (gas to liquid) technology”, Journal of Natural Gas Science and Engineering 9, 2012, 172e183.
Mohammadi Ghahdarijani,A. . R. , Haghighi Asl,A. and Hormozi,F. (2018). Heat Transfer Improve in Heat Exchangers using Flow of Nanofluids. Iranian Journal of Gas Engineering, 4(2), 25-33.
MLA
Mohammadi Ghahdarijani,A. . R. , , Haghighi Asl,A. , and Hormozi,F. . "Heat Transfer Improve in Heat Exchangers using Flow of Nanofluids", Iranian Journal of Gas Engineering, 4, 2, 2018, 25-33.
HARVARD
Mohammadi Ghahdarijani A. . R., Haghighi Asl A., Hormozi F. (2018). 'Heat Transfer Improve in Heat Exchangers using Flow of Nanofluids', Iranian Journal of Gas Engineering, 4(2), pp. 25-33.
CHICAGO
A. . R. Mohammadi Ghahdarijani, A. Haghighi Asl and F. Hormozi, "Heat Transfer Improve in Heat Exchangers using Flow of Nanofluids," Iranian Journal of Gas Engineering, 4 2 (2018): 25-33,
VANCOUVER
Mohammadi Ghahdarijani A. . R., Haghighi Asl A., Hormozi F. Heat Transfer Improve in Heat Exchangers using Flow of Nanofluids. IJGE, 2018; 4(2): 25-33.
Iranian Journal of Gas Engineering