نوع مقاله : مقاله ترویجی
نویسندگان
1 دانشجوی کارشناسی / دانشکده مهندسی شیمی، پردیس دانشکده های فنی، دانشگاه تهران، ایران
2 دانشجوی کارشناسی ارشد / دانشکده مهندسی شیمی، پردیس دانشکده های فنی، دانشگاه تهران، ایران
3 استاد / پردیس دانشکده های فنی، دانشکده مهندسی شیمی، دانشگاه تهران، تهران، ایران
چکیده
پالایشگاه گاز واحدی پردازشی است که برای فرآورش، آمادهسازی و بهینه کردن خواص گاز استخراجی از چاههای گازی استفاده میگردد تا گاز به محصول قابلمصرف تبدیل شود. در پالایشگاه گاز، ترکیبهایی که سبب پایین آوردن ارزش حرارتی گاز شده و مشکلاتی در انتقال و مصرف گاز به وجود میآورند، از گاز طبیعی تفکیک و سپس به خطوط انتقال تحویل داده میشود. درکلیترین حالت تجهیزات یک پالایشگاه به دو قسمت دور از ساحل یا دریایی و ساحلی تقسیم میشوند. بسته به موقعیت مکانی پالایشگاه ممکن است تمام تجهیزات مربوط به قسمت ساحلی باشند، بهعبارتدیگر خوراک ورودی از مخازن دریایی تأمین نگردد. قسمت دریایی از دو بخش سکوهای سر چاهی و خطوط لوله دریایی تشکیلشده است که به ترتیب برای استخراج و انتقال خوراک ورودی پالایشگاه گاز میباشند. قسمت مربوط به خشکی نیز از سه بخش اصلی: عملیاتی، تأسیسات جانبی و مخازن ذخیره تشکیل میشود. باوجودآنکه زیرمجموعههای کلی این سه بخش در تمام پالایشگاهها مشابه میباشند اما ممکن است بسته به وظیفهای که هر پالایشگاه بدان منظور طراحیشده برخی واحدهای آن متفاوت از سایر پالایشگاهها باشد. برای مثال در پالایشگاه چهارم پارس جنوبی واحد شیرین سازی گاز وجود ندارد زیرا در این پالایشگاه پس از تفکیک میعانات و تنظیم نقطه شبنم، گازترش توسط خط لوله جهت تزریق به حوزه نفتی آغاجاری منتقل میگردد و تنها شیرین سازی LPG در آن صورت میگیرد. درصورتیکه در سایر پالایشگاهها علاوه بر عملیات فوق، بهمنظور آمادهسازی گاز برای مصارف گوناگون (نظیر مصارف خانگی) عملیات شیرین سازی نیز انجام میگیرد. بنابراین ترتیب واحدها با توجه به مسائل طراحی تعیین میشود.
کلیدواژهها
موضوعات
عنوان مقاله [English]
A review of Unit operations and Processes of Gas Processing Plants
نویسندگان [English]
1 B.Sc. School of Chemical Engineering, College of Engineering, Tehran, Iran
2 M.Sc. School of Chemical Engineering, College of Engineering, Tehran, Iran
3 Professor at College of Engineering, College of Chemical Engineering, University of Tehran, Tehran, Iran
چکیده [English]
Gas plant is a processing unit that used for processing operation, preparing and properties optimization of extracted gas from gas wells, inorder to changing gas to a usable product. In a gas processing plant separating operation of components which cause reduction of heating value and operating problems in gas transmission and consumption, will be done and the processed gas will be delivered to transmission pipelines. In general case, equipments of a gas plant will be divided in to two parts, off shore and on shore. Although depending on the place of gas plant, it is possible that all of the equipments belong to the on shore part, in another word the feed doesn’t originate from the fields in sea. Off shore part is composed of two parts, wellhead platform and sea pipelines, that used for extraction and transmission of gas plant feed. On shore part is composed of three main parts, operating, utility facilities and storage tanks. Also subdivisions of these parts are the same in all plants, but it is possible depending on special duty of each plants designing purpose, some units were different from other plants. For example in fourth plant of south pars, there is no gas sweetening unit because in this gas plant natural gas will be transmitted to the Aghajari oil field after condensates separation and dew point adjustment, and LPG sweetening is the only sweetening operation there. However in other gas plants sweetening operation along with the above operation will be done inorder to gas preparing for consumption purposes (like domestic consumption). So units sequence will be determined according to designing issues.
کلیدواژهها [English]